If you’re looking to cut the cord on your headphones, there are a few ways to do it. You can buy wireless headphones, or you can convert your existing wired headphones into wireless headphones.
There are a few different methods to do this, but they all involve using a Bluetooth adapter.
In this blog post, Rezence will guide you on how to make wired headphones wireless with bluetooth receivers and provide more useful information.
What are Bluetooth Adapters?
A Bluetooth adapter is a plug-and-play gadget that connects to a computer’s USB port and makes it possible to connect a Jabra device to the computer through Bluetooth.
How do Bluetooth Receivers Work?
Bluetooth receivers work by connecting wirelessly to a Bluetooth-enabled device and streaming audio through a connected speaker system. In order to connect to a Bluetooth receiver, the device must be within range (usually about 30 feet) and have Bluetooth turned on.
The Best Bluetooth adapters
Wireless Connectivity
It’s not very convenient to listen to music wirelessly if the connection is difficult to create and sustain. It should be simple to pair a Bluetooth headphone adaptor with your device.
Even if you have to walk to an adjacent room while wearing your headphones or if the source device is charging across the room, the connection should be strong enough to play audio without frequent skips and pauses.
We examined how easy it was to switch between the two devices that could be connected wirelessly by the majority of the adapters we tested. Additionally, we made a note of which gadgets offered practical visual or auditory indicators to indicate Bluetooth pairing, connection, and disengagement.
Audio Quality
We instantly disregarded any adaptor that audibly altered the quality because a Bluetooth audio receiver should ideally sound as good as a direct, connected connection. The receiver’s internal digital-to-analog converter (DAC), other audio circuits, and the audio codecs it supports all have an impact on the sound quality.
Unfortunately, many of these inexpensive headphone adapters don’t mention which Bluetooth codecs they accept; unless their specifications specify otherwise, we assume that they only support the fundamental SBC codec.
Button Controls
Simple controls are essential because none of these Bluetooth audio receivers allow you to utilize the integrated remote while wearing headphones.
We assessed the buttons’ size, placement, and sensitivity as well as whether or not they effectively controlled our devices. Although many of these adapters are without an actual on/off switch, we appreciate their inclusion.
Battery Life
By connecting them to a MacBook Pro and playing music nonstop through iTunes until the battery died, we evaluated the battery life of each of our finalists.
Microphone Quality
Once you attach a Bluetooth headphone adapter, you cannot use the inline microphone on your headphones, thus it’s critical that the adapter’s built-in microphone has at least sufficient audio quality so you can make a fast call or chat.
None of the mics we tested had terrific audio; several inexpensive Bluetooth earphones have voice quality that is substantially better. Speaking into a tiny piece of plastic that you have to hold up to your mouth while using any of these mics is difficult.
Therefore, we advise grabbing your mobile device if you’re going to be on a lengthy conversation or video chat.
Latency
When streaming audio over Bluetooth instead of a connected connection, latency is added. When you stream from apps like Netflix or YouTube on your phone, there is too much latency, which causes lip-syncing problems where the audio is out of sync with the video. So, we evaluated the latency of our leading candidates.
Output Power
To power your wired headphones, Bluetooth headphone adapters pair a Bluetooth receiver with an amplifier. Each of our top choices had an output power that we measured. Let’s just say that it was significantly lower than any of the more expensive portable headphone amplifiers we suggested.
These affordable Bluetooth adapters are not intended to be used with higher-end audiophile headphones, which have low sensitivity ratings (below 98 dB) or high impedance ratings (above 100 ohms) and need more power to produce satisfying volume levels.
Instead, they should be able to power basic earphones and headphones that are not difficult to drive.
Can You Make Wired Headphones Bluetooth?
The top 5 most popular headphone brands in 2021, according to a poll, were Apple, Beats by Dr. Dre, Bose, Samsung, and JBL.
Any wired headphone can be converted to a wireless headphone in a variety of methods, including by utilizing a Bluetooth transmitter or headphone adapter. Keep your current headphones instead of spending more money on a new set of high-quality ones.
Using Bluetooth Audio Receivers
Both your budget and the audio quality don’t have to suffer!
Making your headphones wireless is a straightforward process. A Bluetooth audio receiver is required. Your wired earphones or headphones can be converted into wireless earphones or headphones with the help of a Bluetooth receiver. Your speaker is the same.
For information on how to operate your transmitter, carefully read the instruction booklet. The actions you must take to convert your wired headphones into wireless ones are as follows:
- Join the transmitter to the headphones.
- Verify that the Bluetooth transmitter is turned on.
- Go to your device’s Bluetooth menu to pair your headphones with it.
- You need to connect your headphones to the transmitter.
- Verify the Bluetooth transmitter is turned on.
- On the device you want to pair your Bluetooth receiver with, open the Bluetooth menu.
- Select the Bluetooth transmitter from the available selections when they display. Depending on who will be hearing it, the name will change.
This is the basic technique for connecting any wired headphones you own to any Bluetooth-enabled device. The TaoTronics 5.0, as I already indicated, will work the best for you to convert your headphones from wired to wireless.
Making use of Bluetooth Headphone Adapters
The Bluetooth adapter has a receiver function as well. Your headphones receive the Bluetooth signal that is picked up by the device.
The procedure will differ based on the adapter you’re using and the devices you’re attempting to connect. To obtain high-quality sound, adhere to these straightforward instructions:
- Connect the Bluetooth adaptor to the headphones.
- Turn the adapter on.
- Open your smartphone’s Bluetooth menu to link the headphones.
- Choose Bluetooth adapter from the menu.
- Verify that the devices have been paired successfully.
The ML100 Bluetooth headphone adapter is what I would advise. This is because it has no significant downsides, excellent music quality, a reliable wifi connection, and a long battery life. The greatest Bluetooth headphone adaptor, it is also inexpensive and easy to use.
With a market share of 49.2%, online shopping dominated how Bluetooth headphones were bought in 2018.
Making Wired Headphones Wireless DIY
The following equipment is necessary for you:
- Wired headphone
- Pair of scissors
- Tape
- Bluetooth Connector and
- An external battery
Below is the step-by-step procedure on how you should carry out the process via DIY:
First, put your Bluetooth connector into the external battery. As soon as it is plugged in, you should turn it on to see if the signal (the light) indicates if it is working or not. It ought to work, but if it doesn’t, make sure your battery isn’t dead.
Your wired headphones should be inserted into the open jack on your Bluetooth connector.
Include the batteries and Bluetooth that are connected to your wired headphones in the wrapping. After everything has been wrapped, tape it all together to keep it from flying off or wandering off.
Next, go to your mobile device’s settings.
Turn on the device after selecting the Bluetooth option, then click the Bluetooth name.
A headset icon will appear after a little while. This proves that the connection worked.
Benefits Of Wireless Headphones
It’s time to learn about the advantages of switching your headphones from wired to wireless using a Bluetooth connection and some simple DIY!
The following are benefits of utilizing wireless headphones:
Ease of Use
The main benefit of true wireless earbuds over traditional earphones is how simple they are to use for a variety of activities. The one highly valued characteristic that motivates everything is the freedom that genuinely wireless earbuds provide thanks to their innovative small, compact, flexible, and portable design.
No Cables
You can use wireless headphones to make calls or listen to music wherever you are since they are wireless, which means they don’t need a connection to do so. Instead, they connect to a source using a USB Bluetooth dongle or a wireless 2.4 GHz radio signal.
Portable
The portability of wireless headsets is another benefit. Wireless headphones are easier to transport because there aren’t any tangled cables to deal with. The majority of wireless headphones may also be folded up, which improves their mobility. You can practically put them wherever because they don’t take up much space.
Sound Quality
Did you know that when choosing headphones, Americans prioritize audio quality above all else? 75% of respondents, according to Statista, said that sound quality was their primary concern when choosing headphones. Naturally, comfort, cost, durability, and weight come next. The most flexible and highest-quality headphones are wireless.
Also read: Are Bluetooth Headphones Better Than Wired?
FAQs
Are Bluetooth Adapters Compatible With All Devices?
Not at all. You do not need to program Bluetooth, which is a standardized digital communication technology. By linking Bluetooth devices with the receiver on your computer, you can customize the system. Any Bluetooth USB adaptor should function.
What Should I Do If I’m Having Trouble with My Bluetooth Adapter?
If you are having trouble with your Bluetooth adapter, there are a few things you can try. First, make sure that the adapter is properly plugged into your computer. Next, try restarting your computer. If that does not work, try unplugging the adapter and then plugging it back in. Finally, if none of these solutions work, you may need to purchase a new Bluetooth adapter.
Can I Switch My Bose Headphones From Wired to Wireless?
Your wired Bose headphones can be changed to wireless, yes. Use a Bluetooth adapter like the Bolle and Raven wireless Bluetooth adapter (QC15) for Bose to accomplish this. It works with iOS and Android devices. All you have to do to use your wireless Bose headphones is insert them into the 3.5 mm port.
Can A Wired Gaming Headset Be Made Wireless?
A Bluetooth headphone adaptor is the cheapest and easiest way to wirelessly connect wired headphones to a Bluetooth device without a port.
In order to make wireless gaming headsets, get a Bluetooth adaptor. Make sure the Bluetooth adaptor and your wired headphones work together. Bluetooth-enable your headset and connect it to the adaptor.
Connect your computer or gaming console to the Bluetooth audio adapter after turning it on. Select the Bluetooth adapter from the list of direct connection options available. Make sure the Bluetooth adaptor is connected properly.
Now, you should be able to dispense with the headphone jack and utilize a premium wireless headset.
Conclusion
We hope that this article can help you make your own wired headphones bluetooth.
Do you have any other ideas on how to make your wired headphones wireless? Anyhow, please share your thoughts in the section below.
Thanks for reading!