How To Pair Skullcandy Wireless Headphones Best Things To Know 2022

How To Pair Skullcandy Wireless Headphones: Best Things To Know 2022

  • Rezence

Seeking ways on how to pair Skullcandy wireless headphones? Skullcandy has a reputation for creating quality headphones at a low price. Fortunately, pairing is relatively easy, and it only takes a few steps. And Rezence will detail everything about the topic. So, let’s get started!

How To Pair Skullcandy Crusher Wireless Headphones

Activate Pairing Mode With Your Skullcandy Headphones

Skullcandy headphones are like most headphones on sale. There are a few buttons to help you navigate, including the Power On/Off button.

The Power button activates Bluetooth functionality for most Skullcandy headphones. Some units have an additional button for Bluetooth.

Simply press and hold for approximately 4 to 5 seconds Power/Bluetooth key. After pairing mode has been activated, the LED light will start to flash.

You can be sure that the Power On/Off button at the side of your Skullcandy headphones may be used to access other modes. To learn more, make sure you read the instructions.

How To Pair Skullcandy Crusher Wireless Headphones

Find The Bluetooth Headphones

This step will allow you to activate Bluetooth connectivity on any device that supports Bluetooth, such as a phone or laptop. You should also ensure that your device is visible.

Remember that Bluetooth headphones can’t be found if the Bluetooth-enabled device’s display isn’t visible. Your phone or laptop should show the headphones in the list.

Android

Pair your headphones with an Android device by going to Settings, activating Bluetooth, selecting “Pair New Device”, and then choosing your Skullcandy device. This completes the pairing process.

iOS

It is very similar to pairing your Skullcandy with an Android device. Navigate to Settings, enable Bluetooth, search for Skullcandy under “Other Devices”, and then choose it.

Windows 10

Click on the Bluetooth button on your laptop and select “Show Bluetooth Devices,” then tap on your Skullcandy headphones.

If the Bluetooth button is not located in your toolbar, you can look at your taskbar at far the bottom of your display screen. It will be below the upward arrow. Follow the steps above.

You can also search your Windows search box for Bluetooth functionality to find it. Next, select “Bluetooth and Other Devices” to choose your headphones.

MacOS

Connect your headphones to your Mac by going to the Apple menu. Select System Preferences, then Bluetooth. Locate your Skullcandy headphones and click “Connect.”

Confirm The Success Of The Pairing Process

When your Skullcandy headphones are successfully paired, there are two ways they will alarm you. They will sound like a beep. The LED light will cease blinking and sound a beep.

The LED light will flash when Bluetooth connectivity is activated on your headphones. After the pairing process has been completed successfully, the LED will stop blinking.

If after you have completed the pairing steps, the LED light stops blinking or the beep sounds stop making an audible sound, it is time to try again. Try resetting your headphones if it fails.

The process of setting up Skullcandy headphones can be different for each model. To ensure that you follow the correct procedure, we strongly recommend that your owner’s manual be used.

The reset process for most Skullcandy headphones involves you turning the headphones off, pressing the Plus and Minus buttons simultaneously, and then waiting for the double sound to be heard.

Why Are My Skullcandy Earbuds Not Charging?

A common issue with earbuds that can be damaged is default charging. It can happen to either one or both of your earbuds. If the charging case doesn’t have a red indicator light when you insert your earbuds, it means that your earbuds don’t charge.

Your earbuds might not close properly, too. The problem could be caused by debris blocking the charging pins. Other cases might result in the earbuds not being seated on the case.

Why Are My Skullcandy Earbuds Not Charging

How To Reset Skullcandy Wireless Earbuds

First, turn off your earbuds. Next, press the Volume and power buttons simultaneously for five seconds. This will reset your paired devices. After removing all connected devices, turn on the earbuds.

Here are some steps to follow if one of you is working alone.

  • Take the Bluetooth device list off the earbuds
  • Place the earbuds inside the charging case
  • Turn off Bluetooth
  • Take your left earbuds out of the case
  • Tap the middle button until you see a red light on your earbuds
  • Recover the earbuds from the case

You can repeat the same steps for the other earbud. Place both earbuds in your ear. If the pairing is successful, both earbuds should beep. Bluetooth can be turned back on your smartphone, tablet, or laptop smartwatch. Pair your device by selecting the Bluetooth list earbuds that you have selected.

How To Fix One Earbud Connection

Skullcandy wireless headphones have one problem: it only connects to one earbud. There is an easy solution to this problem:

  • Turn off Bluetooth on your connected device (Phone or laptop, tablet, etc.)
  • Turn on your earbuds (since your Bluetooth is off, your earbuds won’t be paired).
  • Four times, click in the middle of search earbud. This will turn off and reset your earbuds. This should be done even if the buds aren’t connected to your device.
  • Close the lid and place your earbuds in the case.
  • Now your earbuds can be paired together
  • You will hear a beep to let you know that the earbuds are paired.
  • Start the pairing process by turning Bluetooth back on.

After your device has been paired, both earbuds should now be working.

How To Fix One Earbud Connection

Solutions For Skullcandy Headphones Not Pairing

You may have pairing problems at times. There are several solutions.

When pairing, ensure devices are not too far apart

Soft reset both your devices. Simply turn off the devices to get rid of bugs, and then reconnect them.

Unpair any device previously paired with your device. If your Bluetooth speakers have been paired to your current device, it is likely that your device is trying to find a connection to that device. This issue can be resolved by either unpairing the device or turning it off.

Take your headphones out of your device. If your Bluetooth list shows your headphones but you are unable to pair them, then remove your headphones or “forget” them from your Bluetooth list. Then you can rediscover your headphones.

Disconnect from interfering devices: Devices such as microwaves and routers with sub 3.0 ports can interfere and disrupt the pairing process. A successful connection can be achieved by simply moving away from such devices.

FAQs

FAQs About How To Pair Skullcandy Wireless Headphones

Can Skullcandy Headphones & Earbuds Work With Any Device?

You can connect your Skullcandy headphones to any device that has Bluetooth functionality. It doesn’t matter if it is an Apple or Android phone.

How to Check the Battery Life of Skullcandy Earbuds and Headphones?

After you have connected your headphones or earbuds to your device, your Skullcandy Battery will be visible in the notification section of your device. You can also check the status of your battery by checking the light indicator. When the battery is low, the power button will light up red.

How Long Does Skullcandy Earbuds And Headphones Take To Charge?

Skullcandy Earbuds take approximately 1 hour to charge to 100% and 2 hours to charge the case.

The Skullcandy headphones take 2.5 hours to charge. It does have rapid charging which charges the headphones for 5 hours in 10 minutes. However, this feature will slow down the amount of battery you have to maintain and preserve good battery health.

Is It Possible To Save Your Battery Life By Turning Off Active Noise Cancellation?

Yes, active noise cancellation can drain your battery faster than normal. It is best to turn it off when you are not using it.

Can I Charge My Headphones Or Earbuds Using My Laptop/PC?

You can charge your devices with almost any USB output. Skullcandy recommends a 5W (5V/1A) USB output for the best performance.

Conclusion

You should now be able to pair your Skullcandy headphones with a Bluetooth-enabled device using the information in this article. If you have any questions, please comment below.

Leave a Comment

Your email address will not be published.